Last Updated: November 17, 2026
Quick Summary
Contract to hire is a hiring model where you bring a worker on through a staffing agency for a set trial period, then decide whether to convert that person to a permanent employee. The agency employs and pays the worker during the trial, so you see real work before you commit. You then choose to hire permanently, extend, or end the assignment.
- Most contract-to-hire periods run between 60 and 90 days, though some roles need longer.
- Ask the agency to break the bill rate into pay rate and markup in writing.
- Set a simple evaluation scorecard at day one and score it at day 30 and day 60.
- Agency markups during the trial often add 40% to 65% over the pay rate.
- Set a decision date at day one and put it on the calendar.
Table of Contents
- What Contract to Hire Means for an Employer
- Contract to Hire vs Direct Hire: What Changes for Your Team
- The Contract-to-Hire Staffing Process, Step by Step
- Contract-to-Hire Period Length: How Long the Trial Should Run
- What Belongs in a Contract-to-Hire Agreement for Employers
- Contract-to-Hire Employee Evaluation: Criteria That Decide Conversion
- Pros and Cons Employers Should Weigh Before Committing
- When Contract to Hire Fits Your Hiring Plan, and When It Does Not
- Frequently Asked Questions
What Contract to Hire Means for an Employer
Contract to hire is a hiring model where an employer brings a worker on through a staffing agency for a set trial period, then decides whether to convert that person to a permanent employee. The worker is paid by the agency during the trial.
This guide from IntegrityJobs explains the model from the employer’s side.
You fill a seat now, watch the person do real work, and make the permanent offer on evidence rather than a 45-minute interview.
Three things define the arrangement:
- The trial period. Usually a fixed window, agreed before the worker starts.
- The employer of record. The staffing agency employs and pays the worker during the contract.
- The conversion decision. You choose to hire permanently, extend, or end the assignment.
Contract to Hire vs Direct Hire: What Changes for Your Team
The main difference is who carries the risk during the early months. With direct hire, you commit to a permanent employee on interview evidence alone.
| Factor | Contract to Hire | Direct Hire |
|---|---|---|
| Commitment at start | Trial period only | Permanent from day one |
| Who pays the worker | Staffing agency | Your payroll |
| Time to fill | Often faster | Longer search |
| Risk of a bad fit | Shared with the agency | Yours alone |
| Benefits and payroll | Agency handles during trial | You handle from day one |
| Decision basis | Observed performance | Interviews and references |
What most guides miss is the paperwork shift. During the contract period the worker is not your employee, which changes payroll, benefits, and day-to-day direction.
If you are weighing the two models side by side, our comparison of contract staffing vs direct placement lays out the cost, speed, and flexibility trade-offs.
The Contract-to-Hire Staffing Process, Step by Step
The process runs in a fixed order, and each step sets up the next. Skip one and the conversion decision becomes a guess.

Step 1: Define the Role and the Conversion Criteria
Write the job requirements before you call an agency. Then write the conversion criteria, meaning the specific things the worker must show to earn a permanent offer.
Good criteria are observable. Examples:
- Passes the skills assessment on your actual equipment
- Meets attendance standards for the full trial period
- Completes assigned work without repeated rework
Vague criteria like “good cultural fit” cannot be measured at day 60. Write them down at day one.
Step 2: Screen, Interview, and Onboard the Contract Employee
The staffing agency runs candidate screening and the skills assessment first. You interview a shortlist. Then the chosen worker starts on the agency’s payroll.
Onboarding matters more than most employers expect. Consistent onboarding practices help contract employees settle into the team and give employers a clearer view of how they work.
If you want to see how other employers run this stage end to end, this guide to the best contract to hire staffing agencies covers what to look for in a partner.
Contract-to-Hire Period Length: How Long the Trial Should Run
Most contract-to-hire periods run between 60 and 90 days, though some roles need longer. The right length depends on how long it takes to see real performance.
The Benefits of Contract to Hire Staffing
DAVISCompanies
Use these rules of thumb:
- Simple, repeatable roles: 60 days is usually enough
- Skilled trades and machining: 90 days, so the worker sees a full cycle of work
- Specialized engineering or IT roles: 90 to 180 days
Set the contract period before the start date. An open-ended trial invites drift, and the worker never knows where they stand.
Watch out: extending a trial without telling the worker why damages trust and often costs you the hire.
What Belongs in a Contract-to-Hire Agreement for Employers
A contract-to-hire agreement is the written contract between your company and the staffing agency. It should spell out six things, each carrying a dollar figure or legal obligation.
- The contract period, with a start and end date, plus the notice required to end the assignment early
- The bill rate, meaning what you pay the agency per hour or per period
- The pay rate to the worker, which is separate from the bill rate and should be disclosed
How the Bill Rate and Markup Work
The bill rate is not the worker’s wage. It is the pay rate plus the agency’s markup, which covers payroll taxes, workers’ compensation, unemployment insurance, benefits if offered, and the agency’s margin.
During the trial, the agency pays the worker and remits payroll taxes. You pay the agency’s invoice. That invoice is a business expense, not payroll, which matters for your budgeting and for how the arrangement is classified.
Conversion Fees and How They Decline
Most agencies charge a placement fee when you convert the worker to your payroll. Conversion fees depend on the assignment terms, so the exact fee schedule is set in your agreement and confirmed by quote from IntegrityJobs. Get the exact schedule in writing before the worker starts. A common mistake is assuming conversion is free because the worker has been on your site for months.
Co-Employment, Classification, and Compliance
During the trial, the agency is the employer of record. The worker stays on agency payroll, the agency withholds taxes, and the agency carries workers’ compensation.
A co-employment relationship exists whenever two employers share control over a worker. You direct the day-to-day work; the agency handles wages, benefits, and payroll. To keep the arrangement clean, avoid setting the worker’s pay rate directly, avoid promising benefits, and route wage and discipline decisions through the agency.
Worker classification also belongs in this conversation. If you plan to bring the worker on as an independent contractor after conversion, read our guide on employee vs contractor first, misclassification penalties can exceed the cost of the entire staffing arrangement.
Watch out: a contract-to-hire agreement that lets you direct pay, benefits, or discipline during the trial can blur the co-employment line and create liability the agency was hired to absorb.
Contract-to-Hire Employee Evaluation: Criteria That Decide Conversion
The conversion decision should rest on evidence collected during the trial, not a gut feeling at the end. Set up a simple evaluation scorecard at day one and score it at day 30 and day 60.
Score each area on a 1-to-5 scale:
| Evaluation Area | What You Are Scoring | Weight |
|---|---|---|
| Skills and output | Quality and speed of completed work | High |
| Attendance and reliability | On-time starts, absences, follow-through | High |
| Team fit | How the worker works with the crew | Medium |
| Learning speed | How fast the worker picks up your process | Medium |
| Safety and compliance | Follows rules and procedures | High |
Then set a threshold. For example, convert when the total score is at or above your agreed line and no high-weight area falls below 3.
Pros and Cons Employers Should Weigh Before Committing
Contract to hire solves some problems and creates others. Here is the honest list, with the cost and operational trade-offs spelled out. For a side-by-side view of direct hire vs contract staffing for engineering and manufacturing roles, see how each model fits your hiring goals, budget, and timeline.
Pros for employers:
- Reduced hiring risk, because you see the work before you commit
- Faster time-to-fill than a full permanent search, since the agency sources from an existing pool
- The agency handles payroll, benefits, workers’ compensation, and screening during the trial
Cons for employers:
- Agency markups add cost on top of wages during the trial, often 40% to 65% over the pay rate
- A conversion fee applies if you hire the worker, and it is easy to underestimate
- The worker may leave for a permanent offer elsewhere before you decide
The Cost Comparison, Roughly
A direct hire puts the full cost of a mis-hire on your books, recruiting, onboarding, salary during the ramp, and restarting the search. Contract to hire spreads that risk across the trial, but you pay for the privilege through the markup and conversion fee. For a role where a bad permanent hire would cost more than the markup, the math favors contract to hire.
What Happens If You Do Not Convert
Not every assignment ends in a permanent hire, and the agreement should say what happens when it does not. Before the contract end date, decide whether to extend, convert, or end the assignment, and give the agency the required notice.
Watch out: letting a trial period expire without a decision is the most common way employers lose a good worker to another offer, set a decision date at day one and put it on the calendar.
When Contract to Hire Fits Your Hiring Plan, and When It Does Not
Contract to hire fits best when the role is hard to assess in an interview and the cost of a bad permanent hire is high.
Use it when:
- You need to fill a short-term staffing gap while you evaluate
- The role requires specialized expertise that is hard to verify from a resume
- Your team has had turnover problems and you want proof of fit
Skip it when:
- The role is easy to assess and the labor market is deep
- The candidate has already proven themselves through a prior contract
- You need a permanent leader in the seat from day one
IntegrityJobs provides contract and contract-to-hire staffing for engineering, manufacturing, IT, and skilled trades. If contract to hire fits your plan, our employer services page is where to start.
Hiring for a hard-to-fill technical role puts real cost on every wrong decision. IntegrityJobs has provided technical staffing for 30 years across engineering, manufacturing, IT, and skilled trades.
Frequently Asked Questions
How long does a contract-to-hire period usually last?
Most contract-to-hire arrangements run between three and six months, though the right length depends on the role and how quickly you can judge performance. A CNC machinist may show competence in weeks, while a specialized engineering role can take longer to assess. Set the contract-to-hire period length in the agreement up front, build in a review at the midpoint, and decide whether to extend or convert before the term ends. A clear timeline keeps both the candidate and your managers aligned.
Who pays the contract-to-hire employee during the contract period?
In most arrangements, the staffing agency employs the worker during the contract period, while your company pays the agency a rate for the assignment. Confirm the details with your staffing provider. That structure is why contract-to-hire reduces payroll and compliance work on your side. Confirm in the contract-to-hire agreement for employers who carries workers’ compensation, who pays overtime, and what the bill rate includes, so there are no surprises when the worker converts to your permanent payroll.
What happens if an employer decides not to convert the contract worker?
You can usually end the arrangement at the end of the contract period, or earlier if the agreement allows, without hiring the worker permanently. Review the notice terms and any early-termination fees before you sign. If the person is not the right long-term fit, document the shortfall against your contract-to-hire employee evaluation criteria and tell the agency early so it can start a replacement search. A good staffing partner treats a non-conversion as useful information, not a failed deal.
Is contract to hire cheaper than direct hire?
Not necessarily cheaper in total spend, but it changes when and how you pay. Pricing depends on role, schedule, and terms, so request a current quote from IntegrityJobs for both the assignment rate and any conversion terms. The savings come from reduced hiring risk: you avoid a bad permanent hire, repeat recruitment costs, and another onboarding cycle. Compare the full contract-to-hire cost against the cost of a failed direct hire before you decide.





